ultrathin bonded asphalt surface

  • 413.3 ultrathin bonded asphalt wearing surface

    The ultrathin bonded asphalt wearing surface membrane application rate is dependent upon the type of mix and the surface on which the material will be placed. Adjustments to the target application rates will be considered by the Pavement Engineer using the following table and the existing surface type on which the UBAWS is being placed.

  • 613 – ULTRATHIN BONDED ASPHALT

    613 – ULTRATHIN BONDED ASPHALT SURFACE 600-69 Provide an organizational chart showing the specified lines of authority relating to both mix design and

  • Ultra Thin Bonded Wearing Course - Asphalt Surface

    Ultra Thin Bonded Wearing Course is a polymer rich asphalt emulsion that is designed for use as a high performance asphalt surface treatment.

  • Ultra Thin Asphalt / NovaChip - nbwest.com

    West Contracting is a certified, licensed applicator for Ultra Thin Bonded Asphalt (UBAWS or UTBWC) also known as “NovaChip”. The NovaChip process was

  • Surface Treatments: Bonded Wearing Course -

    Surface Treatments: Bonded Wearing Course Bonded Wearing Course (BWC) is an award-winning technology that seals the existing road surface and provides a new, skid-resistant, ultrathin (5/8" to 3/4") wearing course in one simultaneous operation.

  • [DOC]

    Macrotexture Surface for Ultrathin Bonded

    macrotexture surface for ultrathin bonded asphalt wearing surface requirement njsp-17-04 1.0 Description. This work shall consist of producing a smooth and uniform milled surface in which an Ultrathin Bonded Asphalt Wearing Surface (UBAWS) will be placed.

  • NOV ACHIP-ULTRATHIN BONDED WEARING

    NOV ACHIP-ULTRATHIN BONDED NovaChip is an ultrathin bonded wearing surface with coarse aggregates in a hot mix placed over a special liquid asphalt

  • Ultra Thin Bonded Wearing Course - The

    Ultra Thin Bonded Wearing Course • Ultrathin Bonded Wearing Course. SUPERPAVE ASPHALT MIX 9.5MM FOR SURFACE PG

  • Evaluation of Reclaimed Asphalt Pavement

    1 Evaluation of Reclaimed Asphalt Pavement Materials from Ultra-Thin 2 Bonded Bituminous Surface 3 4 5 6 by 7 8 9 10 Haritha Musty*

  • CHAPTER 11 BONDED WEARING COURSE -

    CHAPTER 11—BONDED WEARING COURSE is a gap or open graded, ultra thin hot-mix asphalt by the Contractor using the surface area calculation in Asphalt

  • Design of Ultra-Thin Bonded Wearing Course

    specified asphalt content SA SA Surface area in m2/kg of combined aggregate for a Type C Ultra Thin Bonded Wearing Course mixture under the applicable

  • Chip Seal over Ultrathin Bonded Asphalt Surface

    Chip Seal over Ultrathin Bonded Asphalt Surface • I-70 Ellis Co., AADT = 11,400 • 3/8" x 1/4" lightweight aggregate spread at 0.0083 cu yd / sy

  • [DOC]

    Macrotexture Surface for Ultrathin Bonded

    macrotexture surface for ultrathin bonded asphalt wearing surface requirement njsp-17-04 1.0 Description. This work shall consist of producing a smooth and uniform milled surface in which an Ultrathin Bonded Asphalt Wearing Surface (UBAWS) will be placed.

  • Bonded Wearing Course - YouTube

    Nov 17, 2014· Bonded Wearing Course is a high-performance surface course for preventive maintenance or new construction over either asphalt or concrete pavements. The one-pass construction process consists of a heavy application of polymer modified asphalt emulsion membrane followed by an ultrathin HMA, both placed by a single

  • Evaluation of Reclaimed Asphalt Pavement

    1 Evaluation of Reclaimed Asphalt Pavement Materials from Ultra-Thin 2 Bonded Bituminous Surface 3 4 5 6 by 7 8 9 10 Haritha Musty*

  • CONSTRUCTION AND PERFORMANCE OF AN ULTRATHIN BONDED

    One of the more promising technologies is the use of an ultrathin bonded hot-mix asphalt (HMA) wearing course (UTBWC). It consists of a layer of HMA laid over a heavy asphalt emulsion layer or membrane. The thickness of the ultrathin surface ranges from 9.5 to 19 mm (3/8 to 3/4 in.).

    Published in: Transportation Research Record · 2001Authors: Douglas I HansonAbout: Material properties · Preservation · Field research · Fertilisation · Design
  • Midland Asphalt Materials Inc. | NovaChip®/Ultra Thin

    NovaChip®/Ultra Thin Bonded Wearing Course was developed in the late 1980 over a polymer rich asphalt course to the existing surface resulting in

  • SECTION 661 ULTRA-THIN BONDED WEARING

    6 Asphalt Surface Treatment, Slurry Seal materials placed in stockpiles or on the road Use the mix design and optimum asphalt content for Ultra-thin Bonded Wearing

  • Novachip | PACE Construction

    Novachip NovaChip® ultrathin bonded wearing course is a preventative maintenance bonded surface course Consisting of a heavy layer of polymer modified asphalt emulsion followed by an ultrathin, gap-graded hot mix asphalt placed by a single machine.

  • Las Vegas contractor enters into Ultra Thin Asphalt

    New paver puts Las Vegas Paving in the Ultra Thin Asphalt Concrete the growing market of ultrathin asphalt bonded to the surface by a warm

  • CHAPTER 8 BONDED WEARING COURSE -

    Bonded Wearing Course for ultra thin hot-mix asphalt (HMA it may be placed thicker to correct minor surface irregularities. Presently bonded wearing courses

  • Asphalt Contractor - September 2008 - E.J.

    cally would be considered a NovaChip or Ultrathin Bonded Wearing Course application the DOT made on the on an asphalt surface and protects the

  • Evaluation of Recycled Asphalt Pavement Materials from

    The ultra-thin bonded bituminous surface (UBBS), popularly known as Novachip, is a thin hot-mix asphalt layer with gap-graded aggregates that is bonded to the

    Authors: F Rahaman · Haritha Musty · M HossainAffiliation: North Carolina State UniversityAbout: Recycling · Rut
  • [DOC]

    Ultra Thin Bonded Asphalt Overlay - Pages

    This work consists of constructing an ultrathin bonded asphalt concrete wearing surface. The ultrathin bonded asphalt concrete consists of application of a warm

  • hallbros

    Ultrathin bonded pavement Ultrathin Bonded Pavement is a paving process that places a thin, coarse aggregate hot mix over a special asphalt membrane. The special ultrathin bonded membrane prevents water leakage and provides a superior bond to the old asphalt or concrete surface.

  • Backcalculation Procedure for Bonded

    1 Backcalculation Procedure for Bonded Concrete 2 Bonded concrete overlays of asphalt (BCOA), or ultra-thin is calculated from normalized surface deflections

    Published in: Transportation Research Record · 2014Authors: Daniel A King · Jeffery R RoeslerAffiliation: University of Illinois at Urbana ChampaignAbout: Finite element method
  • Wiki-Pavements / Bonded Wearing Course -

    Bonded Wearing Course is a high-performance surface course for preventive maintenance or new construction over either asphalt or concrete pavements.

  • SECTION 414 - ULTRATHIN BONDED

    consist of surface preparation, application of asphalt emulsion and asphalt mixture. Asphalt mixture shall be produced by a Certified Hot Mix Asphalt Producer.

  • Laboratory and Numerical Investigation of

    of Thin and Ultrathin Bonded Concrete Overlays of Asphalt Two types of surface preparation for asphalt were used to study their effects on the interface debonding.

  • Deicing (Winter Operations) on Porous and

    Deicing (Winter Operations) on Porous and – Ultrathin bonded asphalt surface • Clear Roads – Snow and Ice Control on Porous and Permeable Pavements:

  • KDOT: 2015 Standard Specifications for State Road

    standard specifications for state road & bridge construction surface recycled asphalt construction ultrathin bonded asphalt surface

  • Kansas Department of Transportation

    SURFACE RECYCLE AND ULTRATHIN BONDED ASPHALT SURFACE Letting Date: K096-086 KA 4648-01 / STP-A464(801) Quantity and Units Unit Price Line No / Item ID

  • Welcome to the City of Salina, Kansas - Bid Tabulations

    80003 - 2018 Ultrathin Bonded Asphalt Surface.pdf - uploaded on 2/27/2018 10:42 AM 80004 - 2018 Brick Streets Bid Tabulation.pdf Bid Tabulations. Note:

  • Surface Recycle and Ultrathin Bonded Asphalt Surface

    Find government bids and contracts from over 110,000 government agencies, including US federal, state, cities, counties, and schools.

  • Forensic investigation of the cause(s) of slippery

    Forensic investigation of the cause(s) of slippery ultra-thin bonded wearing course of an asphalt pavement: influence of aggregate mineralogical compositions

  • Street Improvement Project – City of Overland Park, Kansas

    The Street Improvement Project is an essential element of the city's street maintenance program designed to preserve a Ultra-thin Bonded Asphalt Surface

  • Ultrathin Whitetopping: State-of-the-Practice

    overlay is specifically bonded to the existing asphalt between the existing asphalt and concrete. Ultrathin the asphalt surface can open and

  • Pavement Treatments Tried in Sedgwick

    Pavement Treatments Tried in Sedgwick County ultrathin bonded asphalt surfaces, and hot in-place asphalt recycling. Slurry seals are applied to roads rating

  • Applications for asphalt emulsions | Asphalt

    Applications for asphalt emulsions. Ultrathin Bonded Wearing Course This surface treatment can be used for maintenance on an asphalt or concrete pavement.

  • Asphalt surface maintenance continues Monday

    Oct 08, 2017· APAC-Kansas, Inc., Shears Division of Salina will perform the ultrathin bonded asphalt surface maintenance on the following streets for the Read More.

  • Ultra Thin Bonded Wearing Course - The

    • Ultrathin Bonded Wearing Course C Ultra Thin Bonded Wearing Course SUPERPAVE ASPHALT MIX 9.5MM FOR SURFACE PG

  • Applications for asphalt emulsions | Asphalt

    Applications for asphalt emulsions. Ultrathin Bonded Wearing Course This surface treatment can be used for maintenance on an asphalt or concrete pavement.

  • Ultra Thin Asphalt Concrete Surface (UTACS)

    Ultra Thin Asphalt Concrete Surface (UTACS) Michael R. Dunning, • Now described as Ultrathin HMAC Wearing Course • Refection cracks were fully bonded and

  • Chip Seal over Ultrathin Bonded Asphalt Surface

    Chip Seal over Ultrathin Bonded Asphalt Surface • I-70 Ellis Co., AADT = 11,400 • 3/8" x 1/4" lightweight aggregate spread at 0.0083 cu yd / sy

  • Welcome to the City of Salina, Kansas - Bid Tabulations

    80003 - 2018 Ultrathin Bonded Asphalt Surface.pdf - uploaded on 2/27/2018 10:42 AM 80004 - 2018 Brick Streets Bid Tabulation.pdf Bid Tabulations. Note:

  • 2017 Ultrathin Bonded Asphalt Surface -

    Find out about 2017 Ultrathin Bonded Asphalt Surface and other projects out for bid.

  • Evaluation of Reclaimed Asphalt Pavement

    1 Evaluation of Reclaimed Asphalt Pavement Materials from Ultra-Thin 2 Bonded Bituminous Surface 3 4 5 6 by 7 8 9 10 Haritha Musty*

  • Evaluation of Recycled Asphalt Pavement

    The ultra-thin bonded bituminous surface (UBBS), popularly known as Novachip, is a thin hot-mix asphalt layer with gap-graded aggregates that is bonded to the existing surface with a polymer-modified emulsion membrane. This thin-surfacing improves ride quality, minimizes back spray, increases visibility, and reduces road-tire noise.

  • 2007-18 Performance of Ultra-Thin Bounded

    The surface roughness and condition of these sections have been monitored on Ultra-thin, Hot mix asphalt, Ride Quality Ultra-thin bonded wearing

  • FP2.org » Blog Archive » Bonded Ultrathin Overlays

    When: Bonded ultrathin overlays should be applied when the pavement structure is in good condition, but there are minor to moderate surface distresses. It may also be applied to lessen road/tire noise and improve friction, especially on concrete pavements. And it may be placed as a high performance surface over new construction.

  • Bonded Wearing Course - YouTube

    Aug 16, 2012· The equipment and method of new technology of performing Gap graded Hot Mix Asphalt with max thickness Surface dressing Ultra Thin Overlay - The

  • Forensic investigation of the cause(s) of slippery

    Forensic investigation of the cause(s) of slippery ultra-thin bonded wearing course of an asphalt pavement: influence of aggregate mineralogical compositions

    Published in: International Journal of Pavement Engineering · 2016Authors: Mengesha A Beyene · Richard C Meininger · Nelson Gibson · J F MunozAffiliation: Ses S a · Federal Highway AdministrationAbout: Petrography · Polishing · Mineralogy
  • Asphalt Products - European Asphalt Pavement

    “Asphalt for Ultra-Thin Layers (AUTL) is a hot mix asphalt road surface course laid on a bonding layer, at a nominal thickness between 10 mm and 20 mm with properties suitable for the intended use. The method of bonding is an essential part of the process and the final product is a combination of the bonding system and the bituminous mixture”.

  • www.dot.state.mn.us

    For UltraThin Bonded Wearing Course projects, ALR will be collected only on asphalt pavement laid during this project before the UTBWC. No smoothness will be paid for on the asphalt pavement. Identify ALR using the ProVAL "Smoothness Assurance" analysis, calculating IRI with a continuous short interval of 25 ft [7.62 m] with the 250 mm filter.

  • Thinlays - Asphalt Pavement

    A new generation of thin-lift asphalt overlays called Thinlays™ are a popular maintain surface geometrics, reduce "Texas Considers Ultra-Thin HMA

  • STATE OF OHIO DEPARTMENT OF

    state of ohio department of transportation supplemental specification 874 ultrathin bonded asphalt concrete july 19, 2002 874.01 description 874.02 materials

  • UBAS work continues today - The Salina Post

    Sep 18, 2017· On Monday through Friday, September 18 through 22, APAC-Kansas, Inc., Shears Division of Salina will perform the ultrathin bonded asphalt surface

  • 2016 Ultra-thin Bonded Asphalt Wearing Surface

    Find out about 2016 Ultra-thin Bonded Asphalt Wearing Surface and other projects out for bid.

  • Request for Bids for 2017 ARS Ultra-Thin Bonded

    Sealed bids for the 2017 ARS Ultra-Thin Bonded Wearing Surface, County of St. Louis, County Government an Ultra-thin Bonded Asphalt Wearing

  • ASPHALT PAVEMENT REJUVENATION -

    0 Years Crack Sealing; Micro-Surface; Ultrathin bonded In-place recycling Reflective crack relief system Base stabilization; Rehab Pavement Preservation Timing

  • ND Asphalt Conference April 5-6, 2016

    Ultrathin Bonded Asphalt Surface (UBAS) Lane-Miles overlaid with UBAS 0 1000 2000 3000 4000 5000 6000 • 2009 bonded PFC surface placed with spray paver

  • Spray Paver - Asphalt Paving Equipment

    THE ROADTEC SPRAY PAVER Ultra thin bonded wearing course applications can be used on asphalt or concrete pavements as a preventive maintenance or surface

  • Reducing road noise through mix selection | Asphalt

    Reducing road noise through mix selection. Examples of these types of mixtures or surface treatments are microsurfacing and ultra-thin bonded asphalt surfaces.

  • Job Special Provisions - Non Standard JSPs

    This database contains the Standard JSP's, Non-Standard JSP's and LPA JSP's. Macrotexture Surface for Ultrathin Bonded Asphalt Wearing Surface Requirement :

  • MoDOT Pavement Preservation Research

    seals, micro-surfacing, slurry seals, ultrathin bonded asphalt wearing surface (UBAWS), crack sealing, crack filling, thin overlays, mill and fill, profile milling, hot in-place recycling, cold in-place recycling, diamond grinding, whitetopping, load transfer retrofit and joint repair, and partial/ full depth repair).

  • Construction and Performance of an Ultrathin Bonded

    The thickness of the ultrathin surface ranges Construction and Performance of an Ultrathin Bonded is the use of an ultrathin bonded hot-mix asphalt

    Published in: Transportation Research Record · 2001Authors: Douglas I HansonAbout: Material properties · Preservation · Field research · Fertilisation · Design
  • 2015 PMP Mill & Overlay Bid Tabulation

    Ultrathin Bonded Asphalt Surface (UBAS) S.Y. 56450 $4.80 $270,960.00; $5.10 $287,895.00; 5 Milling (Total Width Cut) 2” S.Y. 132716

  • Ultrathin Bonded Asphalt Surfacing | Bids from

    Find government bids and contracts from over 110,000 government agencies, including US federal, state, cities, counties, and schools.

  • [DOC]

    414-R-590 ULTRATHIN BONDED WEARING

    (Revised 11-16-12) The Standard Specifications are revised as follows: SECTION 414, BEGIN LINE 1, INSERT AS FOLLOWS: SECTION 414 - ULTRATHIN BONDED WEARING COURSE

  • Concrete Overlays of Existing Asphalt

    Concrete Overlays of Existing Asphalt Pavements surface distresses, improve bonding. Bonded | Asphalt. Ultra-thin

  • Pavement Maintenance and Microsurfacing -

    Asphalt Overlay Ultrathin Bonded Asphalt Wearing Surface (UBAWS) Surface Treatments . Microsurfacing Chipseal, slurry seal, cape seal, fog seal